Power management: switch to the on the flash will start charging (the charging indicator is dim).
Neewer tt560 flash speedlite for canon nikon panasonic olympus pentax & other dslr cameras，digital cameras with standard hot shoe power management: switch to the on position, & the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red & tt560 is then ready to shoot. For a test flash, simply press the test button. If the red charging indicator lamp flickers, it indicates low battery. In such case, the power will turn off automatically & you need to replace the batteries. After use, turn power switch to off position. Power control: the flash unit has 8 steps of power output control which indicated by 8 pieces of led lamp for different level. Press '+' & '-' to raise & lower power: 1128,164,132,116,18,14,12,11 vertical rotation angle: 0~90 degrees, horizontal rotation angle: 0~270 degreescompatible with canon digital eos & nikon dslr cameraspower management: switch to the on, the flash will start charging (the charging indicator is dim).for a test flash, press the test button. After use, press the onoff to off to power off.red charging indicator lamp flickers in every 1s; it indicates low battery.the flash unit has 8 steps of power output control which indicated by 8 pieces of led. Production description power management: switch to the on the flash will start charging (the charging indicator is dim).specifications:guide number:38 ( iso 100 )flash mode: m, s1, s2vertical rotation angle :0~90 degreeshorizontal rotation angle: 0~270 degreespower: 4xaasize batteries ( alkaline or ni-mh are usable )light quantity output control :with 18 - stop incrementcolor temperature: 5600kflash duration :1300s~120000sdimensions :190*75*55mmnet weight :286gmodesin m mode, you can set tt560 onto your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power & press the camera shutter, the flash light will flash under the camera synchronous signal.s1 mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. When the flash is s1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger. S2 mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for ttl flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash.safety features & informationfor protection in continuous flashes, to prevent the flash head from getting too hot & damage, please do not flash over 20 times when in power lever 12,11. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please Cool Down The Flash Unit Around 10 Minutes & It Will Turn To Normal Sta
|Neewer is a vibrant multinational enterprise specializing in product development in the photography, film, and music industry. Our focus is on research and development of new products which span all three industries; ranging from amateur equipment to full studio setups for professionals.From our inception in 2010, we have listened to what types of imaging products customers want. Based on our interactions with customers,we develop high quality and cost effective solutions. Once we have identified the types of items our customers desire, we begin researching ways to meet this demand. Our ethos consists of listening and talking to our consumers, developing the solution they desire, then marketing a high quality product as the end result.|
United Arab Emirates